Keyboard shortcuts and commands

3D Decor Tech - Complete 3D Interior Design Solutions > Keyboard shortcuts and commands

[F1] In the environment: opens IntelliCAD help (in English)
[F2] Displays a preview of the operation history
[F3] Enables or disables the ESNAP cursor snapping feature
[F4] Turns the drawing tablet on or off
[F7] Enables or disables auxiliary grid GRID (grid points are 500 mm apart)
[F8] Turns the ORTHO mode on or off (drawing at right angles)
[F9] Enables or disables the SNAP cursor stroke (the stroke is set every 1 mm)
[F10] Shows or hides the Status Bar
[F11] Opens a quick preview of the visualization
[F12] Turns on visualization

[Ctrl] + [Z] Undoes the last operation (in the environment to the very beginning, in the visualization the last 20)
[Ctrl] + [Y] Retry the undone operation
[Ctrl] + [S] Saves the drawing
[Ctrl] + [O] Opens a drawing
[Ctrl] + [N] Starts a new drawing
[E] >> [Enter] or [Del] Deletes an item
[CO] >> [Enter] or [Space] Copies an item
[M] >> {Enter] or [Space] Moves the element
[X] >> [Enter] or [Space] Explodes an element
[RE] >> [Enter] or [Space] Refreshes the drawing
[U] >> [Enter] or [Space] Undoes the last step while drawing (using any tool)
[Enter] or [Space] or [right mouse button] Ends the current operation or redies the last operation
[Esc] Interrupts or ends the operation in progress, closes the window, canceling changes

 

 

WHILE DRAWING A PATH

 

[A] >> [Enter] or [Space] Goes to drawing an arc based on 2 points (the user selects the start and end point)
[S] >> Enter] or [Space] It goes from drawing an arc on a basis of 2 points to drawing an arc on a basis of 3
(the user selects 3 points: the starting point, the second point through which the arc is to pass, and the end point)
[L] >> [Enter] or [Space] Goes to drawing a straight line
[C] >> [Enter] or [Space] Closes the drawn path (note: it does not work in the arc drawing mode)

 

 

 

FREQUENTLY USED

 

[L] >> [Enter] Draws a line
[PL] >> [Enter] Draws a polyline (path)
[A] >> [Enter] Draws an arc
[Rec] >> [Enter] >> [@ x, y] >> [Enter] Draws a rectangle with given dimensions (x, y are the lengths of the sides)
[C] >> [Enter] Draws a circle
[D] >> [Enter] Draws diameter (works in circle drawing mode)
[R] >> [Enter] Draws a radius (works in circle drawing mode)
[PE] >> [Enter] Swap lines and / or arcs in a polyline
[Z] >> [Enter] >> [I] >> [Enter] Zooms the drawing view in
[Z] >> [Enter] >> [O] >> [Enter] Zooms out of the drawing view
[Z] >> [Enter] >> [A] >> [Enter] Shows the entire drawing
[MI] >> [Enter] Mirrors the element
[Offset] >> [Enter] Creates parallel copies of elements, offset by a given value
[Trim] >> 2x [Enter] Removes (trims) portions of elements that have been cut by the specified boundaries
[RO] >> [Enter] Rotates the element in the view plane (in 2D)
[Rotate3d] >> [Enter] Rotates the element at any angle (in 3D)
[DI] >> [Enter] Measures the distance and angle between two picked points
[UCS] >> [Enter] >> [V] >> [Enter] Changes the setting of the coordinate system – sets the system to view
[UCS] >> [Enter] >> [W] >> [Enter] Changes the setting of the coordinate system – sets the system by default
[Bhatch] >> [Enter] Fills items with the specified boundaries with a hatch or pattern

[F1] Turns the lights on or off
[F2] Enables or disables the label with information about the selected tile
[F3] Enables or disables a label with information about the area covered with tiles
[F4] Turns the side and bottom panel functions on or off
[F12] Opens the window for saving the visualization as an illustration or 3D presentation

[Ctrl] + [left mouse button] Rotates the drawing at any angle (in 3D)
[Ctrl] + [right mouse button] Rotates the drawing in the view plane (in 2D)
[Ctrl] + [Shift] + [left mouse button] Zooms in or out of the current view (in real time)
[Ctrl] + [Shift] + [right mouse button] Moves the current view (in real time)
[Pressing the wheel (wheel), moving the mouse] Moves the current view (in real time)
[Turning the mouse wheel]. Incrementally zooms in (x 1.25) or zooms out (x 0.8) the current view
[Double click the mouse wheel] Sets the central view of the entire project